Coda C25 Betriebsanweisung PDF herunterladen (Seite 10)

10 C25 User Guide Version 1.0

Technical Specification

Output power (Watts RMS)

per channel

8 Ohm @ 1 kHz 650

4 Ohm @ 1 kHz 1250

2 Ohm @ 1 kHz 2200

Mono Bridged

8 Ohm @ 1 kHz 2500

4 Ohm @ 1 kHz 4400

THD @ rated power

4 Ohm 1 kHz <0.008 %

20 Hz-20 kHz <0.03 %

Input CMRR >90 dB

Hum & Noise -105 dB

Gain (selectable) +32 dB/+26 dB/+33 dB

Sensitivity for rated output (4 Ohm) +7 dBu/+13 dBu/+6 dBu (1.5V)

Damping Factor 1 kHz, 8 ohms >400

Frequency response 20 Hz-2 0kHz +0/-0.5 dB

Input impedance

(actively balanced) 20 kOhm

Dimensions (mm) - 2U 88 x 482 x 428

Weight 10kgs

Power requirement 230 VAC @ 12amps max

115 VAC @ 18 amps max

Power requirements

The C25 can be supplied for nominal mains voltage of 115 V or 230 V.

An internal link can be set to either 100 V or 120 V for the 115 V version and 220 V or 24 0V for the

230 V version. Normally these are set to 120 V and 240 V respectively.

This amplifier will only operate to its very high specification if it is installed and operated as

described in this manual.

1 2 ... 5 6 7 8 9 10 11 12

Keine Kommentare

Coda C25 Betriebsanweisung Seite 10