Coda C3 Betriebsanweisung PDF herunterladen (Seite 14)

Rear Panel

Power Inlet

The C3 amplifier should be connected to a suitable mains electricity supply using the cable

supplied. The unit uses auto ranging switch mode power supplies which are capable of

operating with a nominal mains voltage of either 115V or 230V, 50/60Hz without re-

configuration.

Audio Input Connectors

All audio connections are fully balanced and wired pin-1 ground, pin-2 hot & pin-3 cold.

The two inputs have pin-1 connected directly to the chassis and feed the signal processing

chains. If an unbalanced source is used, a connection should be made between the pin-3

„cold‟ signal and the ground connection of the unbalanced source.

Audio Output Connectors

The amplifier has two speaker outputs. (Neutrik Speakon

)

Speakon 1 carries both channel 1 and channel 2 outputs

Speakon 2 carries channel 2 output

For non-bridge connections, use Speakon 1 for the first speaker, and Speakon 2 for the

second speaker. Use pins 1+ and 1-.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Keine Kommentare

Coda C3 Betriebsanweisung Seite 14