Coda C3 Betriebsanweisung PDF herunterladen (Seite 19)

Adjust the routing from inputs to outputs (allowing you for example to feed two

outputs from one input). Regardless of hiding, you will always be able to see the

routing in use

Control Bridge mode (see Bridge Mode)

Adjust the protection limiters (see Limiters).

The EQ / Delay tab(s) allows you to adjust the equalization, High-pass and Low-pass

filters, and delays.

The equalization allows you to adjust the frequency and Gain (boost/cut) for each of the

equalization filters, and the bandwidth of the parametric equalisers. The latter controls

allow the responsiveness of the filters to be adjusted either as Octaves or Q, depending on

the setting of Preferences>Show Bandwidth As. There is also a Low-shelf and a High-shelf

filter, each with Frequency, Slope and Gain controls.

A 'Frequency Response' curve shows the shape of each filter individually (by colour), and

the combined effect of all equalization (in white).

The Properties/Options tab contains some properties of the amplifier. Here, you can enter

a name for the amplifier (such as “Left Fill”). Also viewable in this tab are the model name

of the amplifier, and the name of the settings provided by Coda Audio of the factory file.

The Maintenance area shows some details of how the amplifier has been used and the

amount of protection the amplifier is applying.

The Logs area contains graphs of events against time, recording events over a period of

up to three days. Since the amplifier cannot record any events whilst powered-off, breaks

in a log due to power-downs are indicated by a break symbol || in the log. The events

recorded are: Thermal, which is the used thermal capacity, Protection, which is a measure

of how much the amplifier is „dimming‟ itself in order to protect itself from potential

damage, and peak output current for each output. The data in the log can be exported by

right-clicking on the log to launch a context menu, and selecting “copy log data to

clipboard”. The data could then be pasted into a spreadsheet for further analysis. Your

dealer may ask you to do this is you have experienced a problem.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Keine Kommentare

Coda C3 Betriebsanweisung Seite 19